[Solved] Fixing Failed Flow Potentiometer In Armrest Controller: 11060 Error Code

Tractor Error Code11060 Error Code
DescriptionArmrest Controller reports failure of Aux 1st remote valve FLOW potentiometer.

Tractor error code 11060 indicates a failure in the Aux 1st remote valve FLOW potentiometer in the Armrest Controller.

This error can cause a range of symptoms, including reduced hydraulic flow, erratic valve operation, and even complete loss of control.

The cause of this error is typically a faulty potentiometer, which can be difficult to repair due to its location within the Armrest Controller. However, it is important to address this issue promptly to prevent further damage to the tractor’s hydraulic system. Possible fixes include replacing the potentiometer or the entire Armrest Controller.

Tractor error code 11060 indicates a failure in the Armrest Controller’s Aux 1st remote valve FLOW potentiometer, resulting in malfunctioning of the valve.

  • The error code 11060 indicates that the Aux 1st remote valve FLOW potentiometer has failed in the Armrest Controller.
  • This can cause several symptoms such as the remote valve not functioning properly, the tractor not responding to the remote valve commands, the hydraulic system not working as expected, and the tractor not being able to perform certain tasks that require the remote valve.
  • It is important to address this error code as soon as possible to avoid further damage to the tractor and ensure proper functioning of the hydraulic system.

The error code 11060 in a tractor is caused by a failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller, which can result in several symptoms such as malfunctioning remote valve, unresponsive tractor, and improper functioning of the hydraulic system.

It is crucial to address this issue immediately to prevent further damage to the tractor and ensure proper hydraulic system performance.

  • The cause of error code 11060 is a failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller.
  • This failure can result in the remote valve not functioning properly, the tractor not responding to remote valve commands, the hydraulic system not working as expected, and the tractor being unable to perform certain tasks that require the remote valve.
  • It is crucial to address this error code promptly to prevent further damage to the tractor and ensure the hydraulic system’s proper functioning.

To fix error code 11060 on your tractor, you need to replace the failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller. This error can cause issues with the remote valve, hydraulic system, and tractor performance, so it’s important to address it promptly to prevent further damage.

  • To fix error code 11060, which indicates a failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller, follow these steps: 1.
  • Turn off the tractor and disconnect the battery.
  • 2.
  • Remove the Armrest Controller cover and locate the failed potentiometer.
  • 3.
  • Disconnect the wiring harness from the potentiometer.
  • 4.
  • Remove the potentiometer from the Armrest Controller.
  • 5.
  • Install the new potentiometer in the Armrest Controller.
  • 6.
  • Reconnect the wiring harness to the new potentiometer.
  • 7.
  • Replace the Armrest Controller cover.
  • 8.
  • Reconnect the battery and turn on the tractor.
  • 9.
  • Test the remote valve and hydraulic system to ensure proper functioning.

To fix error code 11060, which indicates a failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller, turn off the tractor and disconnect the battery. Remove the Armrest Controller cover and locate the failed potentiometer. Disconnect the wiring harness from the potentiometer and remove it from the Armrest Controller.

Install the new potentiometer in the Armrest Controller and reconnect the wiring harness to the new potentiometer.

Replace the Armrest Controller cover, reconnect the battery, and turn on the tractor.

Test the remote valve and hydraulic system to ensure proper functioning.

The error code 11060 indicates a failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller.

This can cause several symptoms such as the remote valve not functioning properly, the tractor not responding to the remote valve commands, the hydraulic system not working as expected, and the tractor not being able to perform certain tasks that require the remote valve. The cause of this error code is a failed potentiometer.

To fix it, the Armrest Controller cover needs to be removed, the failed potentiometer needs to be located and disconnected, a new potentiometer needs to be installed, and the wiring harness needs to be reconnected. The repair cost will depend on the repair time and required tools, with most tractor repair shops charging between $75 and $150 per hour.

It is important to address this error code promptly to prevent further damage to the tractor and ensure proper functioning of the hydraulic system.

Tractor error code 11060 is a common issue that can occur in various tractor brands.

This error code indicates that the Aux 1st remote valve FLOW potentiometer has failed in the Armrest Controller. This failure can cause several symptoms, such as the remote valve not functioning properly, the tractor not responding to remote valve commands, and the hydraulic system not working as expected. It is crucial to address this error code as soon as possible to prevent further damage to the tractor and ensure proper functioning of the hydraulic system.

Failure to address this issue promptly can result in the tractor being unable to perform certain tasks that require the remote valve. To fix this error code, the failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller needs to be replaced. It is recommended to seek professional assistance to ensure the replacement is done correctly and to avoid any further damage to the tractor.

Which tractor brands commonly experience the 11060 error code and what is the complexity of this error code?

Tractor brands such as John Deere, Case IH, and New Holland can experience error code 11060, indicating a failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller. This failure can cause several symptoms, including improper functioning of the remote valve, unresponsiveness to remote valve commands, and malfunctioning of the hydraulic system. It is crucial to address this issue promptly to prevent further damage to the tractor and ensure proper functioning of the hydraulic system. Seeking professional assistance is recommended to avoid any further damage to the tractor during the replacement process.

How much does it typically cost to fix a failed flow potentiometer in the armrest controller for the 11060 error code, and is it a labor-intensive repair?

To fix error code 11060, which indicates a failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller, the potentiometer needs to be replaced. The cost of the repair can vary depending on the tractor brand and the labor rates of the professional hired to do the job. It is recommended to seek professional assistance to ensure the replacement is done correctly and to avoid any further damage to the tractor. The repair can be labor-intensive, but it is crucial to address the issue promptly to prevent further damage to the tractor and ensure proper functioning of the hydraulic system.

Are there any DIY fixes for the 11060 error code, or is it necessary to take the tractor to a professional mechanic for repair?

Tractor error code 11060 indicates a failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller. This failure can cause several symptoms, such as the remote valve not functioning properly, the tractor not responding to remote valve commands, and the hydraulic system not working as expected. To fix this error code, the failed potentiometer needs to be replaced. It is recommended to seek professional assistance to ensure the replacement is done correctly and to avoid any further damage to the tractor. It is important to address this error code promptly to prevent further damage to the tractor and ensure proper functioning of the hydraulic system.

11060 error fault code explained

Tractor error code 11060 indicates a failed Aux 1st remote valve FLOW potentiometer in the Armrest Controller, causing the remote valve and hydraulic system to malfunction.

To fix it, seek professional assistance to replace the potentiometer and ensure proper functioning.

Promptly addressing this issue is crucial to prevent further damage to the tractor.

[Solved] Fixing Tractor Error Code 51066: Solving Aux 2Nd Raise Solenoid Issues

Error code 51066: Aux 2nd Raise solenoid issue in the tractor. Can cause power loss, unresponsive controls, and unexpected movements. Inspect wiring, test solenoid, check fuse, reset code, and test equipment. Consult manual or technician if needed. Steps to fix inside.

[Solved] Fixing Tractor Error Code 51065: Troubleshooting And Solving Aux 2Nd Lower Solenoid Issues

Encountering error code 51065 on your tractor? It indicates an issue with the Aux 2nd Lower solenoid, causing attachment malfunctions. Inspect, test, repair, and clear the code. Seek professional help if needed. Steps to fix inside.

[Solved] Fixing Error Code 51064: Solving Aux 2Nd Raise Coil Solenoid Short

When you see error code 51064 on your tractor, it indicates a short circuit in the Aux 2nd Raise Coil solenoid. This can cause problems with raising auxiliary equipment and potential damage. Inspect and repair wiring, and replace the solenoid if needed. Steps to fix inside.

[Solved] Fixing Error Code 51063: Solving Aux 2Nd Lower Coil Solenoid Short

When you see error code 51063 on your tractor, it means the Aux 2nd Lower Coil solenoid is shorted to 12 volts. Symptoms include loss of control, jerking, and sparks. Disconnect power, inspect wiring, replace damaged parts, and test for proper operation. Consult a professional if needed. Steps to fix inside.

[Solved] Fixing Tractor Error Code 51056: Troubleshooting And Solving Aux 1St Raise Solenoid Issues

When your tractor shows error code 51056, it means the Aux 1st Raise solenoid has a problem. Inspect wiring for loose or damaged wires, clean or replace the solenoid if needed, and test the tractor for proper functioning. Urgent fix for smooth operation! Steps to fix inside.

[Solved] Fixing Tractor Error Code 51055: Troubleshooting And Solving Aux 1St Lower Solenoid Issues

When your tractor shows error code 51055, it means there's an issue with the Aux 1st Lower solenoid. Disconnect power, inspect wiring for damage, replace or repair as needed, check solenoid for damage or corrosion, replace if necessary, and test for proper operation. Steps to fix inside.
Previous 1…3435363738…312 Next
Previous